A-21 World Waterproof Dome 6 inch Dome Port with Housing Case For GoPro Hero 6 Hero 5 Black Camera HBXLYATMQ


Availability: In Stock


£44.05

£77.33


SPECIFICATIONS--This dome port is suitable for GoPro Hero 6/Hero 5 action camera.The package dimension:21 x 19 x 12cm,material:PC,ABS, Shipping weight(with packing):800g.This dome port is waterproof up to 30m(Maximum).GET EXCELLENT SHOOTING OVER AND UNDER WATER--If you want to capture half half images and improve your camera underwater shots,then you need a dome port.By moving the waterline away from the GoPro lens,a dome port dramatically improves camera's underwater functionality and image quality.Plus,it allows you to make those sick split photo shots that are half underwater,half above it.A COMPLETE SET OF DOME PORT--Comes with a handheld floaty grip,a waterproof housing case,and all the accessory bolts and screws,No other accessories are needed,just insert your camera and you are ready to go.The side of the base has 10 screw,this design allows the dome to be fully disassembled for cleaning and service.KINDLY NOTE:Please pressing harder between the dome port and the camera housing case,and screw down the screws and test before diving.If you want to use your original GoPro waterproof housing,please mount the 2pcs silicone rubbers to the frame as the picture shows.Package Includes: 1 x Dome Port with waterproof housing case +1 x Floaty grip + 1 x SHOOT Velvet bag. 1.Fit for:GoPro Hero 5 Camera 2.Dimension:21 x 19 x 12cm 3.Shipping weight(with packing): 800g 4.Material:PC,ABS 5.Waterproof up to:30M

1.Unscrew the OPEN screws to lift the clamp and remove the GoPro housing from the dome. 2. Put your GoPro camera into the housing and close it. The housing seems similar to regular GoPro housing but it is not completely the same. It is designed specially to fit into the Dome,so your regular housing can not be used or water will get into the dome. 3. Attach the grip to the housing so that the bolt is on the left when your camera is facing away from you. CLEANING: 1.Always rinse the dome with fresh water after seawater use. 2.If for some reason you need to clean the dome from the inside, you will need a size 8 allen key to remove all 10 screws that hold the dome in place. 3.Make sure the dome port is clean before removing the dome. 4.Always use cleaning agent that does not harm acrylic materials. 5.Once your dome is cleaned re-attach it to the backplate and make sure there is no dirt, sand, hair or other debris along the rubber gasket that could compromise the integrity of the waterproof dome. 6.Also make sure that the gasket is in place - it should be inside the narrow recess in the backplate. 7.Tighten the screws until you get resistance, don't over tighten them. Package Included: 1 x Dome Port with waterproof housing case 1 x Floaty Handle Pole 1x SHOOT pouch NOTICE:If you want to use your original GoPro waterproof housing,please mount the 2pcs silicone rubbers to the frame as the picture shows.

A-21 World Waterproof Dome 6 inch Dome Port with Housing Case For GoPro Hero 6 Hero 5 Black Camera HBXLYATMQ

Write a review

Please login or register to review

Related Products